Cisco WS-C6506 Software Manual page 1111

Chapter 44 Configuring Network Admission Control
Displaying the Critical Status of Features on a Port
To display the critical status of features on a port, perform this task in enable mode:
Task
Display the critical status of features on a port. show port critical mod/port
This example shows how to display the critical status of features on a port:
Console> (enable) show port critical 5/1
Port
-----
5/1
Displaying the AAA Fail Policy on a Port
To display the AAA fail policy for EOU on a port, perform this task in enable mode:
Task
Display the AAA fail policy for EOU on a port. show port eou mod/port aaa-fail-policy
This example shows how to display AAA fail policy on a port:
Console> (enable) show port eou 5/1 aaa-fail-policy
Port
-----
5/1
To display the AAA fail policy for web-auth on a port, perform this task in enable mode:
Task
Display the AAA fail policy for web-auth on a
port.
This example shows how to display AAA fail policy on a port:
Console> (enable) show port web-auth 5/1 aaa-fail-policy
Port
-----
5/1
Displaying RADIUS Server Information
To display RADIUS server information, perform this task in enable mode:
Task
Display RADIUS server information.
This example shows how to display RADIUS server information:
OL-8978-04
Critical State Features in Critical State
-------------- ---------------------------
enabled dot1x, eou
AAA-Fail-Policy
------------------
AAA-Fail-Policy
------------------
Configuring Network Admission Control with LAN Port IP
Command
Command
Command
show port web-auth mod/port aaa-fail-policy
Command
show radius
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
44-27