Enabling The Periodic Timer; Displaying Mvrp Configuration Summary - Cisco WS-C6506 Software Manual

Configuring MVRP on the Switch
To set the MVRP timer values, perform this task in privileged mode:
Task
Step 1 Set the MVRP timer values.
Step 2 Verify the configuration.
This example shows how to set the MVRP timers and verify the configuration:
Console> (enable) set port mvrp 4/2-3,4/9-10 timer leaveall 10000
MVRP leaveAll timer value is set to 10000 centiseconds for port(s) 4/2-3,4/9-10.
Console> (enable) set port mvrp 4/2-3,4/9-10 timer leave 600
MVRP leave timer value is set to 600 centiseconds for port(s) 4/2-3,4/9-10.
Console> (enable) set port mvrp 4/2-3,4/9-10 timer join 200
MVRP join timer value is set to 200 centiseconds for port(s) 4/2-3,4/9-10.
Console> (enable)

Enabling the Periodic Timer

The periodic timer defines the frequency during which the periodic events are generated. The value is
preset to 1 second. The periodic timer value cannot be modified but can either be enabled or disabled.
The defaut is disabled.
To enable the MVRP periodic timer, perform this task in privileged mode:
Task
Step 1 Enable the MVRP periodic timer.
This example shows how to enable the MVRP periodic timer on a range of ports:
Console> (enable) set port mvrp 4/2-3,4/9-10,4/12-24 periodictimer enable
MVRP periodic timer is enabled on port(s) 4/2-3,4/9-10,4/12-24.
console>

Displaying MVRP Configuration Summary

To display the summary of MVRP configuration on the switch, perform this task in enabled mode:
Task
Display summary of MVRP configuration.
This example shows how to display the summary of MVRP configuration on the switch:
Console> (enable) show mvrp configuration
Global MVRP Configuration:
MVRP Feature is currently disabled on the switch.
MVRP dynamic VLAN creation is disabled.
Port based MVRP Configuration:
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
18-8
Chapter 18
Command
set port mvrp mod/port timer {join | leave |
leaveall} timer_value
show mvrp configuration
Command
set port mvrp mod/port periodictimer {enable |
disable}
Command
show mvrp configuration
Configuring MVRP
OL-8978-04