Pass-Thru - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Using SPM
Monitor
!
CAUTION:
This is a password-protected option and is for use by your technical
support organization only.

Pass-Thru

The Pass-Thru option allows qualified service personnel to administer IS II/III
applications on a remote PC. It permits you to establish a remote connection
with the control unit to which the IS II/III PC is directly connected. Figure 7
illustrates the relationship of the SPM PC, the communications system control
unit, and the IS II/III PC.
IS II/III PC
Figure 7. Pass-Thru
A Pass-Thru request must be initiated at a DOS PC; it is not available from a
UNIX System PC; that is, Pass-Thru cannot be established between two IS II/III
PCs. The local admin PC must be in an idle state.
Direct
Connection
Turn off
powe r befor
insert e
remo ing or
ving
modu les
AG INPUT AG INPUT
Control Unit
February 1998
Remote
Connection
SPM PC
Issue 1
Page 51