Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual page 21

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Installing the SPM Software
Press any key to begin the installation.
! 
When the installation is finished, the following message appears:
SPM HARD DISK INSTALLATION IS NOW COMPLETE
YOU MUST REBOOT YOUR SYSTEM BEFORE USING SPM
Remove the SPM diskette from Drive A and reboot your system.
! 
The installation procedure is complete. Go to "Initializing the SPM Software."
DOS Installation with Windows 95
Using DOS SPM with Windows 95 improves the interaction of SPM with the
operating system as compared to Windows 3.x installation. For example, the
interaction with the print driver is improved. If an online printer is not available
when you try to print while using SPM, you see a message box explaining the
problem. You can correct the problem by bringing the printer on-line and
continuing, or you can cancel the print operation. SPM operation is not affected
by the error message or the action you take to correct the problem.
Use the following procedure to install SPM. You do not need to remove the
current SPM files. The new files automatically overwrite your current SPM files.
Considerations
Review the following items before you begin the installation procedure.
The installation program automatically performs the following:
If you typed
is detected, you see an error message that tells you to run the
Instal95 program.
Creates the directory c:\spm if it does not already exist.
Checks if the print.exe file is present in any directory listed in the
PATH environment variable.
(the command for DOS installation) instead of
, checks if your PC has Windows 95 installed. If Windows 95
Issue 1
February 1998
Page 7