Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual page 79

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
System Programming
Assign lines, trunks, or pools to extensions
Assign labels to a personal directory
Use centralized telephone programming
When the extension is forced idle, the following occurs: multiline telephone
users hear a reminder tone that indicates the telephone cannot be used;
display telephone users see the message Xhv‡)ÃT’†‡r€Ã7ˆ†’ ; single-line
telephone users do not hear a dial tone.
Forced Idle Reminder Tone
The forced idle reminder tone is a high-low "door-phone" tone 400 ms of 667
Hz tone followed by 400 ms of 571 Hz tone. The tone is provided under the
following circumstances:
At the extension, to remind the user that the system or the extension
is in the forced idle state
At the programming console or at a PC running SPM, to remind the
system manager that the system (or at least one extension) is in the
forced idle state because of administrative activity
In Release 1.1 and higher of the communications system, forced idle reminder
tones occur every 20 seconds. You can adjust the volume of these tones with
the volume control on the system console.
Accessing System Programming
Follow the steps below to access system programming.
Issue 1
February 1998
Page 65