Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual page 36

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Accessing SPM
Press any key to display the SPM Main Menu shown below.
! 
NOTE:
The function keys shown on either side of the display are included
here for quick reference. See "SPM Screens" for details on using
the PC keys in SPM.
If the SPM Main Menu does not appear or if the information on the
screen is garbled, press any key again.
If the COM Port (communications port) screen appears instead of the
SPM Main Menu, it indicates that the SPM software has not been
initialized. See "Initializing the SPM Software."
To select an option, press the function key that corresponds to the
! 
option you want. For example, to select
With a Local or Remote Modem
Connection
The method you use to access SPM by modem depends on whether you are
programming on site (locally) or from a remote location.
If you are on site, the modem must be connected to an 012 or 016
module on the control unit. To establish a connection to the control
unit's internal modem, dial   .
If you are at a remote location, do one of the following:
/DQJXDJH
press
Issue 1
February 1998
Page 22
.