Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual page 38

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Accessing SPM
The password prompt appears on the screen when the connection is
made. (You may have to press
password prompt.)
If the PC is in a remote location and your system has not activated the
Remote Access feature, do the following:
— Use the main telephone number to place a voice call to the
— Instruct the operator to transfer you to the modem (by pressing
— To put the modem on line, type 6UC and press
NOTE:
If you enter a telephone number of fewer than 11 digits, you must end it
with a pound sign (#).
To access SPM through a local or remote modem connection, follow the steps
below.
Set up the appropriate physical connections between the PC and the
! 
control unit. See "Connecting the PC."
6U9U ; the remote access telephone number; the barrier code
preceded by a "W" and X  . The barrier code in the example
below is 555555.
For example: 6U9U ! $$$ !"#ÃX$$$$$$ÃX 
system on the line to which the modem is connected.
Transfer, dialing   , then hanging up the telephone).
hang up the telephone.
February 1998
more than once to get the
Issue 1
Page 24
.
, then