Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual page 51

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Using SPM
SPM indicates the status of the backup by displaying the number of the last
block received (
of blocks to be sent from the control unit (
are backing up from Release 1.0.
If you abort the backup, the partial backup file is deleted to prevent restoration
from a corrupted file and you see the screen shown in Step 8.
When the backup is complete, you see the screen shown in Step 9.
To abort the backup press
! 
When the backup is complete, press
! 
Menu.
Boards
The Boards option allows qualified service personnel to add a board to the next
available slot. The system must be idle to use this option. This option is not
available from the system programming console.
). Line 2 of the display screen shows the estimated number
xx
‰‰‰ ‰‰‰‰
). This line is blank if you
to return to the SPM Main Menu.
to return to the SPM Main
xxx = total number of blocks received
Issue 1
February 1998
Page 37