Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual page 73

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Using SPM
!
WARNING:
An unsuccessful or terminated restore results in a System Erase
(frigid start). All calls are dropped. The system configuration is
erased. All system programming is lost and the system returns to
the factory settings. If the restore is being done remotely, the
connection is dropped immediately. If this happens, attempt to
reconnect to the control unit and immediately perform another
restore. If this is not successful, programming must be restored on
site.
Follow the steps below to perform a restore.
At the SPM Main Menu, press
! 
Follow the instructions for a floppy or a hard disk.
! 
A second window appears which displays the BPUPÃAGPQQ` option and a
directory listing for C:\spm\backup.
If you are performing a Restore with a file saved on a floppy disk, go
to Step 3.
If you are performing a Restore with a file saved on the hard disk, go
to Step 4.
to select Sr†‡‚…r .
Issue 1
February 1998
Page 59