Programming Needed After Upgrade To Release 5.0 - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Upgrading the System
Table 14.

Programming Needed after Upgrade to Release 5.0

Feature
CTI Link
NOTE:
If the MLX module containing the CTI Link is the first module, use the
SPM program to busy-out the slot.
Calling Group Alarm
Thresholds
HotLine
Calling Group Hunt
Type
Group Calling Delay
Primary
Announcement
Sequence
Busy out the board first:*
Menu
no.
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
Program the CTI Link (Note: The switch must be in Hybrid/
PBX mode):
number
Restore the slot:*
Menu
no.
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
More
calling group ext. no.
no. of calls
More
extension
More
calling group ext. no.
More
calling group ext. no.
Enter Exstenion number of Announcent device
(to program another Announcement device) or
end procedure)
Dial the slot
Dial extension
Dial the slot
or
More
Continued on next page
Issue 1
February 1998
Page 89
Dial
or
Drop Dial
Enter HotLine
Dial
, , or
Dial
(to