Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual page 92
Communications system
Hide thumbs
Also See for MERLIN LEGEND Release 6.0:
- System programming manual (1114 pages) ,
- Maintenance and troubleshooting manual (496 pages) ,
- System planning manual (435 pages)
Table of Contents
Advertisement
MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Upgrading the System
— When you upgrade from Release 1.0 to Release 4.1, you must
Table 13. Lists the features added with Release 4.2 of the
communications system.
— When you upgrade from Release 4.1 to Release 4.2, you must
— When you upgrade from Release 4.0 to Release 4.2, you must
— When you upgrade from Release 3.1 to Release 4.2, you must
— When you upgrade from Release 3.0 to Release 4.2, you must
— When you upgrade from Release 2.0 or 2.1 to Release 4.2,
— When you upgrade from Release 1.1 to Release 4.2, you must
— When you upgrade from Release 1.0 to Release 4.2, you must
first program the features listed in Table 7, then you must
program the features listed in Table 8, then the features listed
in Table 9, then the features listed in Table 10, then the features
listed in Table 11, then the features listed in Table 12.
program the features listed in Table 13.
program the features listed in Table 12, then the features listed
in Table 13, then the features listed in Table 14.
program the features listed in Table 11, then the features listed
in Table 12, then the features listed in Table 13.
program the features listed in Table 10, then the features listed
in Table 11, then the features listed in Table 12, then the
features listed in Table 13.
you must program the features listed in Table 9, then the
features listed in Table 10, then the features listed in Table 11,
then the features listed in Table 12, then the features listed in
Table 13.
program the features listed in Table 8, then the features listed
in Table 9, then the features listed in Table 10, then the features
listed in Table 11, then the features listed in Table 12, then the
features listed in Table 13.
first program the features listed in Table 7, then you must
program the features listed in Table 8, then the features listed
Issue 1
February 1998
Page 78
Advertisement
Table of Contents
