Accessing Spm - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance

Accessing SPM

Accessing SPM
The procedure for accessing SPM depends on whether your PC is connected
to the control unit with a modem (either local or remote) or without a modem
(direct). This section covers both of these access procedures.
With a Direct Local Connection
To access SPM when your PC is connected directly to the control unit, follow
the steps below.
Set up the appropriate physical connections between the PC and the
! 
control unit.
See "Connecting the PC."
If you installed SPM on the hard disk of the PC, go to Step 5.
! 
If the PC does not have a hard disk, insert the SPM diskette into
! 
Drive A.
Type and press
! 
Type spm and press
! 
below.
.
$ !
appears on the screen.
to display the SPM Welcome screen shown
X.XX current version of SPM
Issue 1
February 1998
Page 21