Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual page 68

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Using SPM
fx„
Type for the terminal emulation type and press
! 
If you are working with IS II, the IS II main menu appears.
If you are working with IS III, the system prompts you for your login
registration. After you enter your login and press
main menu appears.
To exit from IS II/III programming, press
! 
The system prompts you for confirmation that you want to exit. After
confirmation the following message appears.
Password
The Password option is used by qualified service personnel to change the
modem connection password. A password is always required to establish a
connection with the built-in modem. The password always consists of seven
characters. You can perform remote system programming only if you enter the
password correctly. A default password is set at the factory. You must obtain
this password from your system consultant (SC).
Follow the steps below to change the modem connection password.
February 1998
.
, the IS III
( ).
Issue 1
Page 54