Overview Of Huntgroup Configuration Window; Setting Up Huntgroups - Altigen AltiWare ACM 5.2 Administration Manual

Chapter 19: Hunt Group Configuration
The Huntgroup Configuration window provides for creating hunt groups, setting their
attributes, and assigning group members. To open the Huntgroup Configuration window,
select PBX > Huntgroup Configuration.
Figure 1. Huntgroup Configuration window

Overview of Huntgroup Configuration Window

These are the tabs in the Huntgroup Configuration window:
General—add or delete a hunt group, assign a group name, password, and DID
•
number
Group Member—add or remove members from huntgroups
•
Mail Management—capacity and feature options for hunt group mailboxes
•
Notification—preferences and options for voice mail notification
•
Call Handling—call forwarding, call waiting, and call handling preferences and
•
options
Queue Management—options for setting default or custom phrases used as queue
•
announcements
Apply to Button
The Huntgroup Configuration window often allows you to apply changes to a particular
hunt group or to select many huntgroups to which to apply the changes.
The Apply to button is disabled unless there is a change that can be applied to multiple
hunt groups, and when you use it to apply changes to multiple hunt groups, it works on
only those changed attributes that can be applied.

Setting Up Huntgroups

Set up new huntgroups in the Huntgroup Configuration window.
236
AltiWare ACM 5.2 Administration Manual