The Multi-Site Voip Domain; Creating A Multi-Site Voip Domain - Altigen AltiWare ACM 5.2 Administration Manual

Parameter
Publish as a global
entry

The Multi-site VoIP Domain

A group of AltiGen systems can form a VoIP domain where they share the same global
extension directory and call routing rules. The VoIP domain is based on VoIP framework
and uses IP tie-trunks to interconnect among different sites.
A domain is created in AltiWare Administrator. Here, a system is designated as the
domain Master. Other AltiGen systems can then be added to a VoIP domain. Both 5.1
and 5.2 versions of AltiWare can co-exist in one VoIP domain.
The VoIP domain Master maintains global configurations and propagates the
configurations to all the members belonging to this domain automatically. Any changes
in the global configuration are propagated in real time to the other members in the VoIP
domain.
A multi-site installation requires an AltiEnterprise license.
Note:

Creating a Multi-site VoIP Domain

To create a multi-site VoIP domain and designate a system as the domain Master:
1. Select VoIP > Multi-Site Domain Configuration. The AltiEnterprise Location
Management window opens.
Chapter 25: Enterprise VoIP Network Management
Description
If you are adding a system or 3rd-party VoIP device
that is not part of the VoIP domain, but you want it
to be seen by all servers in the domain, check this
box. (The entry will appear as "Global" in the Type
column.) You can also globalize it later by selecting
the entry in the IP Dialing Table and clicking the
Publish as Global button below the table.
AltiWare ACM 5.2 Administration Manual 327