Setting Login Status For System Restart; Setting Hunt Group Mail Management - Altigen AltiWare ACM 5.2 Administration Manual

Figure 2. Huntgroup Configuration, Group Member tab
3. Select the extension number(s) in the Not Member list. Use Ctrl+click or
Shift+click to select several extensions.
4. Click Add to move them to the Member list.
If the hunt group pilot extension is configured to Ring All Available Members,
Note:
the maximum number of members is 20. See "Setting Call Handling Options"
for details.
To remove extension(s) from a hunt group:
1. Click the extension number(s) in the Member list.
2. Click Remove to move them to the Not Member list.

Setting Login Status for System Restart

Whenever the system is restarted, the administrator can use the drop-down list at the
bottom of the Group Member tab to:
Keep Login Status—all group members retain their original login status for that
•
group prior to restart (default setting).
All Login—all group members are automatically logged into the assigned group
•
after the system is restarted.
All Logout—all group members are logged out of the group when the system is
•
restarted.

Setting Hunt Group Mail Management

The Mail Management settings define how voice messages are handled for a hunt group,
including how messages are announced and processed, and how much capacity is
allotted to message storage.
Chapter 19: Hunt Group Configuration
AltiWare ACM 5.2 Administration Manual 239