To Select An Input Channel - Agilent Technologies 34420A User Manual

Chapter 2 Front-Panel Operation

To Select an Input Channel

To Select an Input Channel
For voltage measurements, you have two independent input channels.
TOGGLES MEASUREMENT CHANNEL
(SCAN) ALTERNATING MEASUREMENT CHANNELS
Pressing
Channel 2.
Pressing
Channel 2 display. Press
Scan mode alternates between input channels every 3 seconds or every
measurement, whichever is longer. If you are using the scan mode, turn
off all the input filters (both digital and analog), see page 55.
Channel
toggles the display between Channel 1 and
Shift Channel
(Scan) creates an alternating Channel 1 and
Channel
RED
DC Voltage
BLACK
GREEN
DC Voltage
WHITE
again to cancel.
2
Channel 1
Channel 2
41