To Set The Hp-Ib Address; Gpib - Agilent Technologies 34420A User Manual

Chapter 4 Remote Interface Reference
To Set the GPIB Address

To Set the HP-IB Address

Each device on the
address. You can set the meter's address to any value between 0 and 31.
The address is set to "22" when the meter is shipped from the factory.
The address is displayed on the front panel when you turn on the meter.
On/Off
Shift < 1 Turn on the front-panel menu.
< <
2 Move across to the
3 Move down a level to the
4 Move down to the "parameter" level to set the address.
Use the left/right and down/up arrow keys to change the address.
Auto/Man
5 Save the change and turn off the menu.
The address is stored in non-volatile memory, and does not change when
ENTER
power has been off or after a remote interface reset.
188

GPIB

GPIB
HP-IB
A: MEAS MENU
I/O MENU
F: I/O MENU
1: HP-IB ADDR
22 ADDR
( ) interface must have a unique
IEEE-488
choice on this level.
command.
HP-IB ADDR