Scpi Compliance Information - Agilent Technologies 34420A User Manual

Chapter 4 Remote Interface Reference

SCPI Compliance Information

SCPI Compliance Information
The following commands are device-specific to the 34420A. They are
not included in the 1994.0 version of the
commands are designed with the
of the syntax rules of the standard.
Many of the required SCPI commands are accepted by the meter but are
not described in this manual for simplicity or clarity. Most of these
non-documented commands duplicate the functionality of a command
already described in this chapter.
CALibration
:COUNt?
:OUTPut { ZERO | GAIN }
:OUTPut?
:SECure:CODE
:SECure:STATe
:SECure:STATe?
:STRing <string>
:STRing?
CALCulate
:FUNCtion
:FUNCtion?
:AVERage:MINimum?
:AVERage:MAXimum?
:AVERage:AVERage?
:AVERage:SDEViation?
:AVERage:PTPeak?
:AVERage:COUNt?
:SCALe:GAIN
:SCALe:GAIN?
:SCALe:OFFSet
:SCALe:OFFSet?
194
SCPI
format in mind and they follow all
SCPI
<code string>
{ OFF | ON | 0 | 1 } [,<code>]
returns 0 or 1
{ SCALe | AVERage }
standard. However, these