Configuring The Speaker Volume - Kyocera FS-C1020MFP User Manual

Contents Previous
Top Page > Configuring the Machine Using Web Browser

Configuring the Speaker Volume

Click the [Speaker Volume] tab on the machine settings page to configure the speaker volume settings.
Item
Keypad Volume
Ring Volume
Line Mon. Vol
Job End Tone Vol
Job Error Tone Vol
Alarm Volume
Top
Copyright © 2009
Next
> Configuring the Machine Settings
Select the volume of the beep that sounds when a key is pressed from 0 (sound off) to 3.
Select the volume of the ring when a call is received from 0 (sound off) to 3.
Select the volume of the sound from the speaker during on hook mode from 0 (sound off) to
3.
Select the volume of the beep that sounds when a job is complete from 0 (sound off) to 3.
Select the volume of the beep that sounds when a job error occurs from 0 (sound off) to 3.
Select the volume of the alarm that sounds when a transmission error or other alert occurs
from 0 (sound off) to 3.
Previous Next
> Configuring the Speaker Volume
Speaker Volume
Description
Settings