Advanced - NETGEAR GSM7212P User Manual

processing. When an IGMP query is sent from a receiver port, the switch waits for the
default or configured MVR querytime for an IGMP group membership report before
removing the port from the multicast group membership. The value is equal to the tenths
of second. The range is from 1 to 100 tenths. The factory default is 5 tenths or one-half.
Use MVR Mode to specify the MVR mode of operation. The factory default is
4.
compatible.

Advanced

From the Advanced link, you can access the following pages:
• MVR Group Configuration
• MVR Interface Configuration
• MVR Group Membership
on page 150
• MVR Statistics
MVR Group Configuration
To display the MVR Group Configuration page, click Switching > MVR > Advanced > MVR
Group Configuration. A screen similar to the following displays.
Use the MVR Group IP to specify the IP Address for the new MVR group.
1.
Click ADD to add a new MVR group.
2.
Click DELETE to delete a selected MVR group.
3.
Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
4.
the latest value of the switch.
Field
Status
Members
Web Management User Guide
on page 148
on page 149
on page 150
Definition
Displays the status of the specific MVR group.
Displays the list of ports that participate in the
specific MVR group.
148