Device Reboot
Use the Device Reboot page to reboot ProSafe® Managed Switches.
To access the Device Reboot page, click Maintenance
To reboot the switch:
Use Reboot Unit No to select the unit to reset. Select all to run reset for all units.
1.
Select the Save prior to reboot radio button and click the APPLY button to reboot the
2.
switch. Prior to reboot the unit, the current configuration will be saved first.
Select the Don't save prior to reboot radio button and click the APPLY button to reboot the
3.
switch. This option permits the user to reboot the unit without saving the current
configuration.
Factory Default
Use the Factory Default page to reset the system configuration to the factory default values.
If you reset the switch to the default configuration, the IP address is
Note:
reset to 169.254.100.100, and the DHCP client is enabled. If you
lose network connectivity after you reset the switch to the factory
defaults, see
To access the Factory Defaults page, click Maintenance
To reset the switch to the factory default settings:
Web Management User Guide
on page 11.
Web Access
338
Reset
Device Reboot.
Reset
Factory Default.