Control; Dhcp Snooping - NETGEAR GSM7212P User Manual

Field
Multicast Storm Recovery Level
Unicast Storm Recovery Mode
Unicast Storm Recovery Level Type
Unicast Storm Recovery Level

Control

To display the page, click the Security
following features:
•

DHCP Snooping

• IP Source Guard
• Dynamic ARP Inspection
DHCP Snooping
The DHCP Snooping folder contains links to the following features:
• DHCP Snooping Global Configuration
• DHCP Snooping Interface Configuration
• DHCP Snooping Binding Configuration
• DHCP Snooping Persistent Configuration
• DHCP Snooping Statistics
DHCP Snooping Global Configuration
To display the DHCP Snooping Global Configuration page, click Security

Snooping Global Configuration.
Web Management User Guide
Control tab. The Control folder contains links to the

on page 275
on page 281
on page 283
on page 275
on page 280
275
Description
Specify the threshold at which storm control
activates. The factory default is 5 percent of port
speed for pps type.
Enable or disable this option by selecting the
corresponding line on the pull-down entry field.
When you specify Enable for Unicast Storm
Recovery and the unicast traffic on the specified
Ethernet port exceeds the configured threshold, the
switch blocks (discards) the unicast traffic. The
factory default is disabled.
Specify the Unicast Storm Recovery Level as a
percentage of link speed or as packages per second.
Specify the threshold at which storm control
activates. The factory default is 5 percent of port
speed for pps type.
on page 277
on page 277
on page 278

Control> DHCP