NETGEAR GSM7212P User Manual page 233

In the Port field, specify the UDP port number the server uses to verify the RADIUS
3.
accounting server authentication. The valid range is 0–65535. If the user has READONLY
access, the value is displayed but cannot be changed.
From the Secret Configured menu, select Yes to add a RADIUS secret in the next field.
4.
You must select Yes before you can configure the RADIUS secret. After you add the
RADIUS accounting server, this field indicates whether the shared secret for this server has
been configured.
In the Secret field, type the shared secret to use with the specified accounting server.
5.
From the Accounting Mode menu, enable or disable the RADIUS accounting mode.
6.
To delete a configured RADIUS Accounting server, click DELETE.
7.
The following table describes RADIUS accounting server statistics available on the page.
Click CLEAR COUNTERS to clear the accounting server statistics.
Field
Accounting Server Address
Round Trip Time(secs)
Accounting Requests
Accounting Retransmissions
Accounting Responses
Malformed Accounting Responses
Bad Authenticators
Pending Requests
Timeouts
Web Management User Guide
Description
Identifies the accounting server associated with the
statistics.
Displays the time interval, in hundredths of a second,
between the most recent Accounting-Response and
the Accounting-Request that matched it from this
RADIUS accounting server.
Displays the number of RADIUS
Accounting-Request packets sent not including
retransmissions.
Displays the number of RADIUS
Accounting-Request packets retransmitted to this
RADIUS accounting server.
Displays the number of RADIUS packets received on
the accounting port from this server.
Displays the number of malformed RADIUS
Accounting-Response packets received from this
server. Malformed packets include packets with an
invalid length. Bad authenticators and unknown
types are not included as malformed accounting
responses.
Displays the number of RADIUS
Accounting-Response packets that contained invalid
authenticators received from this accounting server.
Displays the number of RADIUS
Accounting-Request packets sent to this server that
have not yet timed out or received a response.
Displays the number of accounting timeouts to this
server.
233