Fan Status; Temperature Status; Device Status - NETGEAR GSM7212P User Manual

FAN Status

The screen shows the status of the fans in all units. These fans remove the heat generated
by the power, CPU and other chipsets, make chipsets work normally. Fan status has three
possible values: OK, Failure, Not Applicable (NA).
The following table describes the Fan Status information.
Field
UNIT ID
FAN
Click REFRESH to refresh the system information of the switch.

Temperature Status

The screen shows the current temperature of the CPU and MACs. The temperature is instant
and can be refreshed when the REFRESH button is pressed. The maximum temperature of
CPU and MACs depends on the actual hardware.
The following table describes the Temperature Status information.
Field
CPU
MAC
Click REFRESH to refresh the system information of the switch.

Device Status

The screen shows the software version of each device.
The following table describes the Device Status information.
Field
Firmware Version
Boot Version
CPLD Version
Web Management User Guide
Description
The unit identifier is assigned to the switch which the
fan belongs to.
The working status of the fan in each unit.
Description
The current temperature of the CPU in the switch.
The current temperature of the MACs in the switch.
Description
The release.version.maintenance.build number of
the code currently running on the switch. For
example, if the release was 8, the version was 0, the
maintenance number was 3, and the build number
was 11, the format would be '8.0.3.11'.
The version of the boot code which is in the flash
memory to load the firmware into the memory.
The version of the software for CPLD.
19