Ip Binding Configuration - NETGEAR GSM7212P User Manual

Flow label is 20-bit number that is unique to an IPv6 packet, used by end stations to signify
14.
quality-of-service handling in routers. Flow label can specified within the range (0 to
1048575).
Use IPv6 DSCP Service to specify the IP DiffServ Code Point (DSCP) field. The DSCP is
15.
defined as the high-order six bits of the Service Type octet in the IPv6 header. This is an
optional configuration. Enter an integer from 0 to 63. The IPv6 DSCP is selected by possibly
selection one of the DSCP keyword from a dropdown box. If a value is to be selected by
specifying its numeric value, then select the 'Other' option in the dropdown box and a text
box will appear where the numeric value of the DSCP can be entered.
Click ADD to add an IPv6 rule.
16.
Use DELETE to select the checkbox of the rule you want to delete and click DELETE.
17.

IP Binding Configuration

When an ACL is bound to an interface, all the rules that have been defined are applied to the
selected interface. Use the IP Binding Configuration page to assign ACL lists to ACL
Priorities and Interfaces.
To display the IP Binding Configuration page, click Security
Configuration.
To configure IP ACL interface bindings:
Select an existing IP ACL from the ACL ID menu.
1.
The packet filtering direction for ACL is Inbound, which means the IP ACL rules are
applied to traffic entering the port.
Specify an optional sequence number to indicate the order of this access list relative to other
2.
access lists already assigned to this interface and direction.
A low number indicates high precedence order. If a sequence number is already in use
for this interface and direction, the specified access list replaces the currently attached
access list using that sequence number. If the sequence number is not specified by the
Web Management User Guide
303
 
ACL> Advanced IP Binding