Https; Https Configuration - NETGEAR GSM7212P User Manual

HTTPS

From the HTTPS link, you can access the following pages:
•

HTTPS Configuration

• Certificate Management
• Certificate Download
HTTPS Configuration
Secure HTTP enables the transmission of HTTP over an encrypted Secure Sockets Layer
(SSL) or Transport Layer Security (TLS) connection. When you manage the switch by using
a Web interface, secure HTTP can help ensure that communication between the
management system and the switch is protected from eavesdroppers and man-in-the-middle
attacks.
Use the Secure HTTP Configuration page to configure the settings for HTTPS
communication between the management station and the switch.
To display the Secure HTTP Configuration page, click Security
Configuration.
To configure HTTPS settings:
Use HTTPS Admin Mode to Enable or Disable the Administrative Mode of Secure
1.
HTTP. The currently configured value is shown when the web page is displayed. The
default value is Disable. You can only download SSL certificates when the HTTPS
Admin mode is disabled.
Use SSL Version 3 to Enable or Disable Secure Sockets Layer Version 3.0. The currently
2.
configured value is shown when the web page is displayed. The default value is Enable.
Use TLS Version 1 to Enable or Disable Transport Layer Security Version 1.0. The currently
3.
configured value is shown when the web page is displayed. The default value is Enable.
Web Management User Guide
on page 243
on page 244
on page 245
243
 
Access > HTTPS HTTPS