Vlan Example Configuration - NETGEAR GSM7212P User Manual

They are easy to manage. The addition of nodes, as well as moves and other changes,
•
can be dealt with quickly and conveniently from a management interface rather than from
the wiring closet.
They provide increased performance. VLANs free up bandwidth by limiting node-to-node
•
and broadcast traffic throughout the network.
They ensure enhanced network security. VLANs create virtual boundaries that can be
•
crossed only through a router. So standard, router-based security measures can be used
to restrict access to each VLAN.
Packets received by the switch are treated in the following way:
When an untagged packet enters a port, it is automatically tagged with the port's default
•
VLAN ID tag number. Each port has a default VLAN ID setting that is user configurable
(the default setting is 1). The default VLAN ID setting for each port can be changed in the
Port PVID Configuration screen. See "Port PVID Configuration" on page 3-103.
When a tagged packet enters a port, the tag for that packet is unaffected by the default
•
VLAN ID setting. The packet proceeds to the VLAN specified by its VLAN ID tag number.
If the port through which the packet entered does not have membership with the VLAN
•
specified by the VLAN ID tag, the packet is dropped.
If the port is a member of the VLAN specified by the packet's VLAN ID, the packet can be
•
sent to other ports with the same VLAN ID.
Packets leaving the switch are either tagged or untagged, depending on the setting for
•
that port's VLAN membership properties. A U for a given port means that packets leaving
the switch from that port are untagged. Inversely, a T for a given port means that packets
leaving the switch from that port are tagged with the VLAN ID that is associated with the
port.
The example given in this section comprises numerous steps to illustrate a wide range of
configurations to help provide an understanding of tagged VLANs.

VLAN Example Configuration

This example demonstrates several scenarios of VLAN use and describes how the switch
handles tagged and untagged traffic.
In this example, you create two new VLANs, change the port membership for default VLAN 1,
and assign port members to the two new VLANs:
In the Basic VLAN Configuration screen (see
1.
the following VLANs:
A VLAN with VLAN ID 10.
•
A VLAN with VLAN ID 20.
•
In the VLAN Membership screen (see
2.
membership as follows:
For the default VLAN with VLAN ID 1, specify the following members: port 7 (U) and
•
port 8 (U).
Web Management User Guide
VLAN Configuration
VLAN Configuration
362
on page 137), create
on page 137) specify the VLAN