NETGEAR GSM7212P User Manual page 334

Receiver Index. Selects the receiver for which data is to be displayed or configured.
1.
Allowed range is 1 to 8.
Use Receiver Owner to specify the entity making use of this sFlowRcvrTable entry. The
2.
empty string indicates that the entry is currently unclaimed and the receiver configuration is
reset to default values. An entity wishing to claim an sFlowRcvrTable entry must ensure that
the entry is unclaimed before trying to claim it. The entry is claimed by setting the owner
string. The entry must be claimed before any changes can be made to other sampler
objects.
Use Receiver Timeout to specify the time (in seconds) remaining before the sampler is
3.
released and stops sampling. A management entity wanting to maintain control of the
sampler is responsible for setting a new value before the old one expires. Allowed range is
0 to 4294967295 secs. A value of zero sets the selected receiver configuration to its default
values.
Use Maximum Datagram Size to specify the maximum number of data bytes that can be
4.
sent in a single sample datagram. The manager should set this value to avoid fragmentation
of the sFlow datagrams. Default Value: 1400. Allowed range is 200 to 9116.
Use Receiver Address to specify the IP address of the sFlow collector. If set to 0.0.0.0, no
5.
sFlow datagrams will be sent.
Use Receiver Port to specify the destination port for sFlow datagrams. Allowed range is 1
6.
to 65535.
Field
Receiver Datagram Version
sFlow Interface Configuration
sFlow agent collects statistical packet-based sampling of switched flows and sends them to
the configured receivers. A data source configured to collect flow samples is called a
sampler. sFlow agent also collects time-based sampling of network interface statistics and
sends them to the configured sFlow receivers. A data source configured to collect counter
samples is called a poller.
Web Management User Guide
Description
The version of sFlow datagrams that should be sent.
334