Port Security Configuration - NETGEAR GSM7212P User Manual

Port Security Configuration

Use the Port Security feature to lock one or more ports on the system. When a port is locked,
only packets with an allowable source MAC addresses can be forwarded. All other packets
are discarded.
To display the Port Security Configuration page, click Security

Security Port Administration.
To configure the global port security mode:
In the Port Security Mode field, select the appropriate radio button to enable or disable
1.
port security on the switch.
The Port Security Violation table shows information about violations that occurred on ports
that are enabled for port security. The following table describes the fields in the Port Security
Violation table.
Field
Port
Last Violation MAC
VLAN ID
Web Management User Guide
Description
Displays the physical interface for which you want to
display data.
Displays the source MAC address of the last packet
that was discarded at a locked port.
Displays the VLAN ID corresponding to the Last
Violation MAC address.
266

Traffic Control> Port