Port Dvlan Configuration; Voice Vlan Configuration - NETGEAR GSM7212P User Manual

Port DVLAN Configuration

To display the Port DVLAN Configuration page, click Switching
DVLAN Configuration.
Use Interface to select the physical interface for which you want to display or configure
1.
data. Select 'All' to set the parameters for all ports to same values.
Use Admin Mode to specify the administrative mode via which Double VLAN Tagging can
2.
be enabled or disabled. The default value for this is Disabled.
Use the 2-byte hex Global EtherType as the first 16 bits of the DVlan tag.
3.
802.1Q Tag - Commonly used tag representing 0x8100
•
vMAN Tag - Commonly used tag representing 0x88A8
•
Custom Tag - Configure the EtherType in any range from 0 to 65535
•

Voice VLAN Configuration

Use this menu to configure the parameters for Voice VLAN Configuration. Note that only a
user with Read/Write access privileges may change the data on this screen.
Web Management User Guide
108
  
VLAN Advanced Port