NETGEAR GSM7212P User Manual page 155

Address Table
This table contains information about unicast entries for which the switch has forwarding
and/or filtering information. This information is used by the transparent bridging function in
determining how to propagate a received frame.
To display the Address Table page, click Switching > Address Table> Advanced
Table.
Use Search By to search for MAC Addresses by MAC Address, VLAN ID, and port.
1.
Searched by MAC Address - Select MAC Address from pull-down menu, enter the 6
•
byte hexadecimal MAC Address in two-digit groups separated by colons, for example
01:23:45:67:89:AB. Then click on the "Go" button. If the address exists, that entry will
be displayed as the first entry followed by the remaining (greater) mac addresses. An
exact match is required.
Searched by VLAN ID - Select VLAN ID from pull-down menu, enter the VLAN ID, for
•
example 100. Then click on the "Go" button. If the address exists, the entry will be
displayed as the first entry followed by the remaining (greater) mac addresses.
• Searched by Port
Unit/Slot/Port, for example 2/1/1. Then click on the "Go" button. If the address exists,
the entry will be displayed as the first entry followed by the remaining (greater) mac
addresses.
Web Management User Guide
- Select Port from pull-down menu, enter the port ID in
155

Address