Http File Download - NETGEAR GSM7212P User Manual

The factory default is Image1.
To download SSH key files, SSH must be administratively disabled
Note:
and there can be no active SSH sessions.
To download SSL PEM files SSL must be administratively disabled
Note:
and there can be no active SSH sessions.
Use Transfer Mode to specify what protocol to use to transfer the file:
2.
TFTP - Trivial File Transfer Protocol
•
SFTP - Secure File Transfer Program
•
SCP - Secure Copy
•
Use Server Address Type to specify either IPv4 or IPv6 to indicate the format of the
3.
TFTP/SFTP/SCP Server Address field. The factory default is IPv4.
Use Server Address to enter the IP address of the server in accordance with the format
4.
indicated by the Server Address Type. The factory default is the IPv4 address 0.0.0.0.
Use Remote File Name to enter the name of the file you want to download from the server.
5.
You may enter up to 32 characters. The factory default is blank.
Use User Name to enter the username for remote login to SFTP/SCP server where the file
6.
resides. This field is visible only when SFTP or SCP transfer modes are selected.
Use Password to enter the password for remote login to SFTP/SCP server where the file
7.
resides. This field is visible only when SFTP or SCP transfer modes are selected.
The last row of the table is used to display information about the progress of the file transfer.
8.
The screen will refresh automatically until the file transfer completes.

HTTP File Download

Use the HTTP File Download page to download files of various types to the switch using an
HTTP session (for example, via your Web browser).
To display this page, click Maintenance
Web Management User Guide

Download
344

HTTP File Download.