NETGEAR GSM7212P User Manual page 145

VLAN ID - Specifies the VLAN ID on which MLD Snooping Querier is administratively
1.
enabled and VLAN exists in the VLAN database.
Use Querier Election Participate Mode to enable or disable the MLD Snooping Querier
2.
participate in election mode. When this mode is disabled, up on seeing other querier of
same version in the vlan, the snooping querier move to non querier state. Only when this
mode is enabled, the snooping querier will participate in querier election where in the least ip
address will win the querier election and operates as the querier in that VLAN. The other
querier moves to non-querier state.
Use Querier VLAN Address to specify the Snooping Querier Address to be used as source
3.
address in periodic MLD queries sent on the specified VLAN.
Field
Operational State
Operational Version
Last Querier Address
Web Management User Guide
Description
Specifies the operational state of the MLD Snooping
Querier on a VLAN. It can be in any of the following
states:
• Querier: Snooping switch is the Querier in the
VLAN. The Snooping switch will send out periodic
queries with a time interval equal to the configured
querier query interval. If the snooping switch sees
a better querier in the VLAN, it moves to
non-querier mode.
• Non-Querier: Snooping switch is in Non-Querier
mode in the VLAN. If the querier expiry interval
timer is expires, the snooping switch will move into
querier mode.
• Disabled: Snooping Querier is not operational on
the VLAN. The Snooping Querier moves to
disabled mode when MLD Snooping is not
operational on the VLAN or when the querier
address is not configured or the network
management address is also not configured.
Displays the operational MLD protocol version of the
querier.
Displays the IP address of the last querier from
which a query was snooped on the VLAN.
145