Pci And Pci Express Cards; Removing A Pci Or Pci Express Card - Dell Vostro 220 Service Manual

PCI and PCI Express Cards

Removing a PCI or PCI Express Card

1 Follow the procedures in "Before Working on Your Computer" on page 35.
2 Remove the computer cover (see "Removing the Computer Cover" on
3 If your computer is a Vostro 220s, remove the chassis support bracket (see
4 Disconnect any cables connected to the card.
5 Remove the screw that secures the card to the back panel of the computer.
6 Remove the card from the card connector on the system board:
Downloaded from www.Manualslib.com
CAUTION:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see
the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
NOTICE:
The procedure for removing and replacing PCI and PCI Express cards is
identical (except where noted) for the Vostro 420, Vostro 220, and Vostro 220s
computers; the illustrations provided are for example only and may not represent
your particular computer precisely.
page 47).
"Removing the Chassis Support Bracket" on page 55). Otherwise, proceed
to step 4.
• For a PCI card, grasp the card by its top corners, and ease it out of its
connector.
• For a PCI Express card, rotate the securing tab away from the card
while grasping the card by its top corners, and then ease it out of its
connector.
manuals search engine
PCI and PCI Express Cards
59