NOTE:
Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box
PC and follow the steps in
follow the steps in
After working inside your Embedded Box
Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Follow step 1 to step 6 in
"Removing the back
Procedure
1. Remove the screws that secure PCI/PCIe cards to the chassis.
a. chassis
b. PCIe card
c. M3x5 countersunk screws (2)
2. Remove the screws that secure the PCI/PCIe filler-plate bracket to the chassis.
3. Remove the bracket from the chassis.
4. Remove the filler-plate from the chassis.
Removing the PCI/PCIe card
Before working inside your Embedded Box
cover".
PC. After working inside your Embedded Box PC,
PC. For more safety best practices, see the Regulatory
Removing the PCI/PCIe card
15
29