Htaws Page - Garmin G1000H Pilot's Manual

HAZARD AVOIDANCE

HTAWS PAGE

The HTAWS Page is specialized to show terrain, obstacle, and potential impact point data in relation to the
aircraft' s current altitude, without clutter from the basemap. Aviation data (airports/heliports, VORs, and other
NAVAIDs) can be displayed for reference. If an obstacle and the projected flight path of the aircraft intersect,
the display automatically zooms in to the closest potential point of impact on the HTAWS Page.
Aircraft orientation on this map is always heading up unless there is no valid heading. Two views are available
relative to the position of the aircraft: the 360° default display and the radar-like ARC (120°) display. Map range
is adjustable with the RANGE Knob from 1 to 200 nm, as indicated by the map range rings (or arcs).
Displaying the HTAWS Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select HTAWS Page.
Changing the HTAWS Page view:
1) Press the VIEW Softkey.
2) Press the 360 or ARC Softkey to select the desired view.
Or :
1) Press the MENU Key.
2) Select 'View Arc' or 'View 360º' (choice dependent on current state) and press the ENT Key to change the view
Showing/hiding aviation information on the HTAWS Page:
1) Press the MENU Key.
2) Select 'Show Aviation Data' or 'Hide Aviation Data' (choice dependent on current state) and press the ENT Key.
336 Garmin G1000H Pilot's Guide for the Bell 407GX
™
190-01255-00 Rev. A