Garmin G1000H Pilot's Manual page 516

Integrated flight deck pilot’s guide for the bell 407gx
Hide thumbs Also See for G1000H:
Table of Contents

Advertisement

APPENDIX B
Error Message
Canceled
Card Full
Err
Timeout
UPDATING GARMIN DATABASES
The Garmin database updates can be obtained by following the instructions detailed in the 'Aviation
Databases' section of the Garmin website (fly.garmin.com). Once the updated files have been downloaded
from the website, a PC equipped with an appropriate SD card reader is used to unpack and program the
new databases onto an existing Supplemental Data Card. Equipment required to perform the update is as
follows:
• Windows-compatible PC computer (running Windows XP, Vista, or Windows 7)
• SD Card Reader: SanDisk SDDR-93, SanDisk SDDR-99, Verbatim #96504, or equivalent
• Updated database obtained from the Garmin website
• Existing Supplemental Database SD Cards (010-00330-4A, -4B, -4C, -4D, -4E, or -4F) from the PFD and
MFD
In some cases it may be necessary to obtain an unlock code from Garmin in order to make the database
product functional. It may also be necessary to have the system configured by a Garmin authorized service
facility in order to use some database features.
After the data has been copied to the appropriate data card, perform the following steps:
1) With system power OFF, remove the MFD database card from the bottom card slot of the MFD.
2) Update the Garmin databases on the MFD card.
3) Insert the MFD database card into the bottom card slot of the MFD.
4) Apply power to the system, check that the databases are initialized and displayed on the power-up screen
(Figure B-10). When updating the terrain and FliteCharts databases, a 'Verifying' message may be seen. If this
message is present, wait for the system to finish loading before proceeding to step 5.
504
Database synchronization has been canceled by removing the bottom SD card in
display being updated
SD card does not contain sufficient memory
Displayed for all other errors that may cause the synchronization process to be halted
System timed-out prior to the database transfer completing
Table B-1 Database Synchronization Error Messages
Garmin G1000H
Pilot's Guide for the Bell 407GX
Description
190-01255-00 Rev. A

Advertisement

Table of Contents
loading

Table of Contents