Garmin G1000H Pilot's Manual page 372

Integrated flight deck pilot’s guide for the bell 407gx
Hide thumbs Also See for G1000H:
Table of Contents

Advertisement

HAZARD AVOIDANCE
Altitude
Mode
Non-Threat Traffic,
2500' Above,
Descending
"No Bearing"
Traffic (Bearing
Undetermined),
Distance 4.0
nm, 500' Above,
Climbing
Proximity Traffic,
900' Above,
Level, Flight ID
Displayed
Displaying traffic on the Traffic Map Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Select the OPERATE Softkey to begin displaying traffic. OPERATING is displayed in the Traffic mode field.
4) Select the STANDBY Softkey to place the system in the Standby mode. STANDBY is displayed in the Traffic
mode field.
5) Turn the RANGE Knob clockwise to display a larger area or counter-clockwise to display a smaller area.
360
Traffic Advisory with ADS-B Directional
Altitude
Information, 500' Below, Climbing
Mode
Figure 6-95 Traffic Map Page
Garmin G1000H
Pilot's Guide for the Bell 407GX
Traffic Display
Range Rings
Non-Threat
Traffic with
ADS-B
Directional
Information,
6000' Above,
Level
Traffic
Advisory Off-
Scale, 400'
Below, Level
Non-Threat
Traffic,
Altitude Not
Reported
190-01255-00 Rev. A

Advertisement

Table of Contents
loading

Table of Contents