Garmin G1000H Pilot's Manual page 469

7) Press the ENT Key. 'OK' will be highlighted.
8) Press the ENT Key again.
9) The SAVE SETTINGS window is now displayed with the cursor highlighting 'SAVE CONNECTION'.
10) The selected network can be saved to system memory to make re-connection easier at a later time.
To connect the selected network without saving:
a) Turn the large FMS Knob to move the cursor to highlight 'CONNECT'.
b) Press the ENT Key.
To save and connect the selected network:
a) Press the ENT Key. A checkmark is placed in the checkbox and the cursor moves to the airport field as shown
in Figure 8-101.
b) Using the FMS Knobs, enter an airport identifier to be associated with the saved network. This aids in identifying
the network later in the event of duplicate network names.
c) Press the ENT Key. The cursor moves to 'CONNECT'.
d) Press the ENT Key again to connect to the selected network.
190-01255-00 Rev. A
Figure 8-100 Save Option
Figure 8-101 Save Connection
Garmin G1000H ™ Pilot's Guide for the Bell 407GX
ADDITIONAL FEATURES
457