Garmin G1000H Pilot's Manual page 54

SYSTEM OVERVIEW
6) To stop the timer, press the ENT Key with 'STOP?' highlighted. The field changes to 'RESET?'.
7) To reset the timer, press the ENT Key with 'RESET?' highlighted. The field changes back to 'START?' and the
digits are reset.
The flight timer can be set to count up from zero starting at system power-up or from the time that the
aircraft lifts off; the timer can also be reset to zero at any time.
Setting the flight timer starting criterion
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the field next to the flight timer.
4) Turn the small FMS Knob to select the starting criterion (PWR-ON or IN-AIR) and pr ess the ENT Key.
Resetting the flight timer
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the MENU Key.
3) With 'Reset Flight Timer' highlighted, press the ENT Key.
The G1000H records the time at which departure occurs, depending on whether the pilot prefers the
time to be recorded from system power-up or from aircraft lift off. The displayed departure time can also be
reset to display the current time at the point of reset. The format in which the time is displayed is controlled
from the System Setup Page.
Setting the departure timer starting criterion
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the field next to the departure time.
4) Turn the small FMS Knob to select the starting criterion (PWR-ON or IN-AIR) and pr ess the ENT Key.
Resetting the departure time
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the MENU Key.
3) Use the FMS Knob to highlight 'Reset Departure Time' and press the ENT Key.
42 Garmin G1000H ™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A