Com Operation; Com Transceiver Selection And Activation - Garmin G1000H Pilot's Manual

AUDIO PANEL AND CNS

4.2 COM OPERATION

COM TRANSCEIVER SELECTION AND ACTIVATION

When turning on the system for use, the system remembers the last frequencies used and the active
NOTE:
COM transceiver state prior to shutdown.
The COM Frequency Box is composed of four fields; the two active frequencies are on the left side and the
two standby frequencies are on the right. The COM transceiver is selected for transmitting by pressing the MIC
Keys on the Audio Panel. During reception of audio from the COM radio selected for transmission, audio from
the other COM radio is muted.
An active COM frequency displayed in green indicates that the COM transceiver is selected on the Audio
Panel (MIC1 or MIC2 Key).
Frequencies in the standby field are displayed in either white or gray. The standby frequency in the tuning
box is white. The other standby frequency is gray.
COM2 Radio is Selected on
the Audio Panel
98
Active
Fields
Tuning Box
Figure 4-3 Selecting a COM Radio for Transmit
Garmin G1000H Pilot's Guide for the Bell 407GX
™
Standby
Fields
190-01255-00 Rev. A