Garmin G1000H Pilot's Manual page 375

t m
RaFFic aP
The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the
RANGE Knob from 2 to 12 nm, as indicated by the map range rings.
Changing the display range on the Traffic Map Page:
1) Turn the RANGE Knob.
2) The following range options are available:
2 nm
•
2 and 6 nm
•
6 and 12 nm
•
ADDITIONAL TRAFFIC DISPLAYS
Traffic information can be displayed on the following maps on the MFD when the unit is operating:
• Navigation Map Page
• Traffic Map Page
• Trip Planning Page
Traffic information can also be displayed on the PFD when Synthetic Vision System (SVS) enabled. See the
Additional Features Section for details.
Displaying traffic information (MFD maps other than the Traffic Map Page):
1) Select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map.
When traffic is selected on maps other than the Traffic Map Page, a traffic icon is shown to indicate traffic
is enabled for display (Figure 6-98).
190-01255-00 Rev. A
Figure 6-97 Traffic Map Page Menu
P D R
age isPlay ange
Garmin G1000H
• Nearest Pages
• Active Flight Plan Page
• System Pages
Pilot's Guide for the Bell 407GX
™
HAZARD AVOIDANCE
363