Garmin G1000H Pilot's Manual page 467

To set up a new Wi-Fi connection:
1) Select the AVAIL Softkey on the MFD. A list of available networks will be displayed in the AVAILABLE NETWORKS
window as shown in Figure 8-97. Signal strength is shown for each network, as well as security requirements
and whether the network has been saved in the system's memory.
2) If necessary, select the RESCAN Softkey to have the system scan again for available networks.
Or :
a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on 'Rescan Available Networks'.
c) Press the ENT Key.
3) Press the FMS Knob to place the cursor in the list of networks.
190-01255-00 Rev. A
Figure 8-97 Available Wi-Fi Networks
Garmin G1000H ™ Pilot's Guide for the Bell 407GX
ADDITIONAL FEATURES
455