Terminal Procedures Charts - Garmin G1000H Pilot's Manual

Integrated flight deck pilot’s guide for the bell 407gx

Hide thumbs Also See for G1000H:

Table of Contents

TERMINAL PROCEDURES CHARTS

Selecting Terminal Procedures Charts:

While viewing the Navigation Map Page, Nearest Airport Page, or Flight Plan Page, select the SHW CHRT

1) Press the MENU Key to display the PAGE MENU.

2) Turn the large FMS Knob to scroll through the OPTIONS Menu to Show Chart.

3) Press the ENT Key to display the chart.

Navigation Map Page OPTIONS Menu

When no terminal procedure chart is available for the nearest airport or the selected airport, the banner

CHART NOT AVAILABLE appears on the screen. The CHART NOT AVAILABLE banner does not refer to

the Jeppesen subscription, but rather the availability of a particular airport chart selection or procedure for a

selected airport.

If there is a problem in rendering the data (such as a data error or a failure of an individual chart), the banner

UNABLE TO DISPLAY CHART is then displayed.

190-01255-00 Rev. A

Waypoint Airport Information Page OPTIONS Menu

Figure 8-21 Option Menus

Figure 8-22 Chart Not Available Banner

Figure 8-23 Unable To Display Chart Banner

Garmin G1000H

Pilot's Guide for the Bell 407GX

ADDITIONAL FEATURES