a
D
ltitUDe
The pilot can select the volume of airspace in which non-threat and proximity traffic is displayed. TAs
occurring outside of these limits will always be shown.
Changing the altitude range:
1) On the Traffic Map Page, select the ALT MODE Softkey.
2) Select one of the following Softkeys:
•
ABOVE: Displays non-threat and proximity traffic from 9000 feet above the aircraft to 2700 feet below the
aircraft. Typically used during climb phase of flight.
NORMAL: Displays non-threat and proximity traffic from 2700 feet above the aircraft to 2700 feet below
•
the aircraft. Typically used during enroute phase of flight.
BELOW: Displays non-threat and proximity traffic from 2700 feet above the aircraft to 9000 feet below the
•
aircraft. Typically used during descent phase of flight.
•
UNREST (unrestricted): All traffic is displayed from 9900 feet above and 9900 feet below the aircraft.
3) To return to the Traffic Page, select the BACK Softkey.
Or :
1) Press the MENU Key.
2) Turn the small FMS Knob to select one of the following (see softkey description in step 2 above):
•
ABOVE
•
NORMAL
•
BELOW
•
UNRESTRICTED
3) Select the ENT Softkey.
190-01255-00 Rev. A
isPlay
Garmin G1000H
Pilot's Guide for the Bell 407GX
™
HAZARD AVOIDANCE
361