Pfd Annunciations And Alerting Functions; System Alerting; Marker Beacon Annunciations - Garmin G1000H Pilot's Manual

Integrated flight deck pilot’s guide for the bell 407gx
Hide thumbs Also See for G1000H:
Table of Contents

Advertisement

FLIGHT INSTRUMENTS

2.3 PFD ANNUNCIATIONS AND ALERTING FUNCTIONS

The following annunciations and alerting functions are displayed on the PFD. Refer to the Engine Indication
and Crew Alerting System (EICAS) Section for information on the Crew Alerting System (CAS) and to Appendix
A for more information on alerts and annunciations.

SYSTEM ALERTING

The System Messages Window conveys messages to the flight crew regarding problems with the G1000H
System. When a new message is issued, the MSG Softkey flashes to alert the flight crew. It continues to flash
until pressed, which opens the System Messages Window and acknowledges the message(s) which initiated the
flashing. When the window is open, messages for conditions which are no longer active turn gray. Messages
generated while the window is open are not automatically displayed, but cause the MSG Softkey to begin
flashing again. Pressing the MSG Softkey while the System Messages Window is open closes the window unless
the MSG Softkey is flashing.

MARKER BEACON ANNUNCIATIONS

Marker Beacon Annunciations are displayed on the PFD to the left of the Selected Altitude. Outer marker
reception is indicated in blue, middle in yellow, and inner in white. Refer to the Audio Panel and CNS Section
for more information on Marker Beacon Annunciations.
72
Messages
Window
Figure 2-37 Alerting System
Outer Marker
Middle Marker
Figure 2-38 Marker Beacon Annunciations
Garmin G1000H
Pilot's Guide for the Bell 407GX
Annunciation
Window
Softkey
Flashes for
New System
Message
Inner Marker
Altimeter
190-01255-00 Rev A

Advertisement

Table of Contents
loading

Table of Contents