Mfd System Pages - Garmin G1000H Pilot's Manual

MFD SYSTEM PAGES

In the Auxiliary (AUX) Page Group, there are two system pages: System Setup and System Status. The System
Setup Page allows management of various system parameters, while the System Status Page displays the status
of all G1000H system LRUs.
SYSTEM SETUP PAGES
The two System Setup Pages allow management of the following system parameters:
• Pilot Profiles
• Date/time
• Display Units
(see Flight Instruments Section)
• Baro Transition Alert (see Flight Instruments
Section)
• Airspace Alerts (see Flight Management Section)
• Arrival Alerts (see Flight Management Section)
• Audio Alerts
• Flight Director
Selecting the System Setup Page:
1) Turn the large FMS Knob to select the AUX Page group.
2) Turn the small FMS Knob to select System Setup.
3) Press the SETUP 1 or SETUP 2 Softkey to select the System Setup 1 or System Setup 2 Page.
190-01255-00 Rev. A
Figure 1-27 System Setup 1 Page
Garmin G1000H ™ Pilot's Guide for the Bell 407GX
• MFD Data Bar Fields (Navigation Status Box)
(see Flight Management Section)
• GPS CDI scaling for GPS navigation source
(see Flight Instruments Section)
• COM Configuration
(see Audio Panel and CNS Section)
• Nearest Airports display criteria
(see Flight Management Section)
• Inlet (see Engine Indication Section)
• Voice Callouts
(see Hazard Avoidance Section)
SYSTEM OVERVIEW
31