Garmin G1000H Pilot's Manual page 203

3) If the pointer is placed on an existing airport, NAVAID, or user waypoint, the waypoint name is highlighted.
4) Press the Direct-to Key to display the Direct-to Window with the selected point entered as the direct-to
destination.
5) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
6) Press the ENT Key again to activate the direct-to.
Cancelling a Direct-to:
1) Press the Direct-to Key to display the Direct-to Window.
2) Press the MENU Key.
3) With 'Cancel Direct-To NAV' highlighted, press the ENT Key. If a flight plan is still active, the system resumes
navigating the flight plan along the closest leg.
190-01255-00 Rev. A
Figure 5-53 Direct-to Window - Cancelling Direct-to Navigation
Garmin G1000H Pilot's Guide for the Bell 407GX
™
FLIGHT MANAGEMENT
Page Menu
- Cancel Direct-To
Navigation
191