Garmin G1000H Pilot's Manual page 474

ADDITIONAL FEATURES
To send a transmission manually:
Manual transmission of data can only be performed while the aircraft is on the ground.
NOTE:
1) While viewing the Report Status Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to move the cursor to the SEND button on the desired data report.
3) Press the ENT Key.
To restore Reports Page options to default settings:
1) While viewing the Report Status Page, press the MENU Key.
2) Turn the FMS Knob to select 'Restore Defaults' in the menu list as shown in Figure 8-106.
3) Press the ENT Key.
4) A confirmation window as shown in Figure 8-107 is now displayed.
5) Turn the large FMS Knob to select 'YES' or 'NO'.
6) With 'YES' highlighted, press the ENT Key.
462
Figure 8-106 Restore Defaults
Figure 8-107 Restore Defaults Confirmation
Garmin G1000H ™ Pilot's Guide for the Bell 407GX 190-01255-00 Rev. A